Translation unavailable — this article is shown in English. View English version
Summary
A protein shake is one of the simplest ways to deliver a concentrated dose of high-quality protein and the amino acid leucine to your muscles after training (or at any time of day when whole food is impractical). But not all shakes are equal. The protein source, the liquid base, and the add-ins all affect the total protein, leucine content, and macro profile of the finished drink.
This article covers the science behind why protein shakes work, what makes one shake better than another, and how to build a shake that reliably crosses the leucine threshold for maximal muscle protein synthesis. The Protein Shake Optimizer calculator applies these principles to give you a live nutritional breakdown as you add ingredients.
Muscle Protein Synthesis
Muscle protein synthesis (MPS) is the process by which your body builds new muscle proteins. After resistance exercise, MPS rates rise for 24-48 hours, but the magnitude of that rise depends heavily on whether amino acids are available in the bloodstream. Without dietary protein, the exercise stimulus alone produces only a modest increase in MPS.
The molecular mechanism centres on the mTORC1 signalling pathway (mechanistic target of rapamycin complex 1). When amino acids, particularly leucine, reach a sufficient concentration in muscle cells, they activate mTORC1, which in turn phosphorylates downstream targets (including p70S6K and 4E-BP1) that initiate the assembly of ribosomes on mRNA. This is translation initiation — the rate-limiting step of protein synthesis (Norton & Layman, 2006).
In plain terms: leucine is the key that turns the ignition. Without enough of it, the engine idles even if you have fuel (other amino acids) in the tank.
The Leucine Threshold
The “leucine trigger hypothesis” proposes that a minimum amount of leucine per meal is required to maximally stimulate MPS. Research converges on approximately 2-3 grams of leucine per meal in young adults, with older adults (65+) potentially needing 3-4 grams due to age-related anabolic resistance.
Key evidence
-
Norton & Layman (2006) demonstrated in a rat model that leucine content of a meal regulated the initiation of protein synthesis in skeletal muscle after exercise, with a clear threshold effect via the mTOR/p70S6K pathway.
-
Churchward-Venne et al. (2012) tested this in humans by comparing 25g of whey protein (~3.0g leucine) against just 6.25g of whey supplemented with extra leucine to match the 3.0g total. The low-protein + leucine condition stimulated MPS equivalently to 25g whey in the first 1-3 hours post-exercise. However, only the full 25g dose sustained elevated MPS through 3-5 hours, indicating that while leucine triggers synthesis, a full complement of amino acids is needed to sustain it.
-
A 2021 systematic review (Frontiers in Nutrition) found that 16 of 29 eligible studies supported the leucine trigger hypothesis, with stronger evidence in older adults and when isolated protein sources were used rather than mixed whole-food meals.
The calculator sums the leucine contribution of every ingredient in your shake:
Where
If the total exceeds 2.5g, the shake reliably crosses the leucine threshold for a young adult. The calculator flags shakes that fall short.
Complete vs Incomplete Proteins
A “complete” protein contains all nine essential amino acids (EAAs) in sufficient proportions to support human protein synthesis. Not all protein powders are equal. The amino acid profile — especially leucine, lysine, and methionine content — determines how effectively a protein source stimulates MPS.
Amino acid profiles of common protein sources
| Protein source | Protein per 100g powder | Leucine (% of protein) | Leucine per 30g scoop | Limiting amino acid | Digestion speed |
|---|---|---|---|---|---|
| Whey isolate | 80-90g | 10-11% | 2.5-3.0g | None | Fast (peak at ~60 min) |
| Whey concentrate | 70-80g | 9-10% | 2.0-2.5g | None | Fast |
| Casein | 70-80g | 8-9% | 1.7-2.0g | None | Slow (peak at ~3-4 hrs) |
| Soy isolate | 80-90g | 6-7% | 1.5-1.8g | Methionine | Moderate |
| Pea isolate | 77-81g | 6-7% | 1.4-1.7g | Methionine | Moderate |
Sources: Gorissen et al. (2018) measured amino acid composition across commercially available plant-based and dairy protein isolates. Leucine percentages above are derived from their data.
”Fast” vs “slow” proteins
The distinction originates from the landmark Boirie et al. (1997) study, which labelled whey and casein with carbon-13 leucine and tracked their digestion kinetics:
- Whey is soluble and passes through the stomach quickly, producing a sharp spike in blood amino acids within 60-90 minutes. This rapid rise strongly stimulates MPS but is short-lived.
- Casein clots in stomach acid, creating a gel that releases amino acids slowly over 4-6 hours. This sustained delivery inhibits whole-body protein breakdown by 34% but produces a smaller MPS spike.
For a post-workout shake, whey’s fast absorption profile is generally preferred. For a bedtime shake or meal replacement, casein’s sustained release may be more appropriate. Some athletes blend both.
Plant proteins: the leucine gap
Plant-based proteins (pea, soy, rice, hemp) typically contain 30-40% less leucine per gram of protein than whey. This means you need a larger serving to cross the 2.5g leucine threshold:
- 30g whey isolate provides ~2.7g leucine (threshold met)
- 30g pea isolate provides ~1.5g leucine (threshold not met)
- 45g pea isolate provides ~2.3g leucine (close but still marginal)
The practical solution is either to use a larger scoop of plant protein, blend plant sources (e.g. pea + rice to complement amino acid profiles), or add leucine-rich foods like milk or Greek yoghurt to the shake.
BCAAs — Do You Need Them?
Branched-chain amino acids (BCAAs) — leucine, isoleucine, and valine — are the three EAAs with a branched molecular structure. They are heavily marketed as standalone supplements for muscle growth and recovery. The evidence does not support this when adequate protein is consumed.
What the research says
-
Wolfe (2017) conducted a comprehensive review and found no human studies in which orally ingested BCAAs alone increased MPS. Two intravenous infusion studies actually showed that BCAAs decreased MPS (from 37 to 21 nmol/min/100 ml leg volume in one study), because the other six EAAs became rate-limiting. His conclusion: “the claim that consumption of dietary BCAAs stimulates muscle protein synthesis or produces an anabolic response in human subjects is unwarranted.”
-
Dieter, Schoenfeld & Aragon (2016) reviewed a study claiming BCAA supplementation preserved lean mass during caloric restriction and found that the data did not support the conclusion. After recalculating effect sizes and identifying statistical errors in the original paper, they concluded that changes in body composition were a product of the caloric deficit itself, not the BCAA supplementation.
-
The ISSN position stand (Jäger et al., 2017) acknowledges that while BCAAs can activate anabolic signalling, there is “a paucity of evidence supporting a beneficial effect for BCAA supplementation in promoting increases in muscle protein synthesis or lean mass” when total protein intake is adequate.
The bottom line
BCAAs provide only 3 of the 9 EAAs. Without the other six, your body cannot build complete muscle proteins regardless of how much leucine is present. If you are already consuming 1.6-2.2 g/kg/day of protein from whole foods and/or protein powder, BCAA supplements offer no additional benefit. A single scoop of whey already contains 5-6g of naturally occurring BCAAs plus all the other EAAs needed to sustain MPS.
Save the money. The calculator does not include BCAA supplements as an ingredient category because the evidence does not justify them when the shake already contains complete protein.
Practical Shake Building
A well-built protein shake should hit three targets:
- Minimum 2.5g leucine to cross the MPS threshold
- 20-40g total protein (the ISSN-recommended per-meal range for maximising MPS)
- Macro balance that fits your daily targets (some bases add significant calories from fat or sugar)
How different bases affect macros
| Base (250ml) | Calories | Protein | Fat | Carbs | Leucine |
|---|---|---|---|---|---|
| Whole milk | 160 kcal | 8.3g | 8.8g | 12.0g | 0.8g |
| Semi-skimmed milk | 125 kcal | 8.5g | 4.5g | 12.0g | 0.8g |
| Skimmed milk | 90 kcal | 8.8g | 0.5g | 12.5g | 0.8g |
| Oat milk | 120 kcal | 1.0g | 5.0g | 16.0g | 0.05g |
| Almond milk | 30 kcal | 0.5g | 2.5g | 1.0g | 0.03g |
| Water | 0 kcal | 0g | 0g | 0g | 0g |
Dairy milk contributes meaningful protein and leucine. Plant milks contribute almost none — if you use oat or almond milk, you rely entirely on the protein powder to hit leucine targets.
Worked example: classic post-workout shake
Classic shake: 250ml whole milk + 30g whey isolate + 1 banana (120g)
Protein from whey isolate (30g scoop, ~85% protein)
= 25.5g protein
Protein from whole milk (250ml)
= 8.3g protein
Protein from banana (120g)
= 1.3g protein
Total protein
= 35.1g
Leucine from whey isolate (10.5% of protein)
= 2.68g
Leucine from whole milk (9% of protein)
= 0.75g
Leucine from banana (negligible)
= 0.08g
Total leucine
= 3.51g
Result
Total: 35.1g protein, 3.51g leucine (threshold met), ~370 kcal. This shake comfortably exceeds the 2.5g leucine threshold.
Worked example: plant-based shake
Vegan shake: 250ml oat milk + 40g pea isolate + 20g peanut butter
Protein from pea isolate (40g scoop, ~80% protein)
= 32.0g protein
Protein from oat milk (250ml)
= 1.0g protein
Protein from peanut butter (20g)
= 5.0g protein
Total protein
= 38.0g
Leucine from pea isolate (6.5% of protein)
= 2.08g
Leucine from oat milk (negligible)
= 0.05g
Leucine from peanut butter (6.8% of protein)
= 0.34g
Total leucine
= 2.47g
Result
Total: 38.0g protein, 2.47g leucine (just below threshold), ~350 kcal. This shake narrowly misses the 2.5g leucine target. Adding 5g of soy milk or increasing the pea protein to 45g would push it over.
This illustrates a key point: plant-based shakes can deliver plenty of total protein but may still fall short on leucine. The calculator flags this automatically.
Timing — The Anabolic Window
The “anabolic window” is the popular belief that you must consume protein within 30-60 minutes of exercise or miss out on muscle gains. The evidence does not support this narrow framing.
What the meta-analysis found
Schoenfeld, Aragon & Krieger (2013) conducted a meta-analysis of 23 studies examining the effect of protein timing on muscle strength and hypertrophy. Key findings:
- An initial analysis suggested a small benefit for consuming protein close to exercise.
- After controlling for total daily protein intake, the effect vanished. The studies showing a timing benefit were almost all ones where the protein-timing group consumed more total protein per day than the control group.
- The authors concluded: “consuming adequate protein in combination with resistance exercise is the key factor for maximizing muscle protein accretion” — not the precise timing of intake.
Practical guidance
The current scientific consensus (ISSN position stand, Jäger et al. 2017) is:
- Total daily protein matters far more than timing. Hit your daily target of 1.6-2.2 g/kg/day for muscle building.
- Distribute protein across 4+ meals with at least 0.4 g/kg per meal (approximately 25-40g per meal for most adults). This ensures multiple leucine threshold crossings per day.
- If you train fasted, consuming protein within 1-2 hours post-exercise is sensible because your last amino acid delivery was many hours ago.
- If you had a protein-rich meal 2-3 hours before training, there is no urgency to consume a shake immediately after. Blood amino acid levels from that meal are still elevated.
The anabolic window is real but far wider than 30 minutes. A reasonable guideline is to consume a protein-rich meal or shake within 4-6 hours of your training session, which most people do naturally as part of their normal eating schedule.
Assumptions & Limitations
-
Leucine values are averages. The leucine content of protein powders varies by brand, batch, and processing method. The calculator uses published average values from peer-reviewed amino acid composition studies (primarily Gorissen et al. 2018). Your actual powder may differ by 10-15%.
-
The 2.5g leucine threshold is a guideline, not a cliff edge. MPS is not binary (on/off). It increases progressively with leucine dose up to a saturation point. Shakes with 2.0g leucine still stimulate MPS, just not maximally. The threshold is a practical target, not a physiological law.
-
Absorption varies by individual. Gut transit time, digestive enzyme activity, and the presence of other foods all affect how quickly amino acids reach the bloodstream. The fast/slow distinction between whey and casein is an average population response.
-
Older adults need more. The leucine threshold for adults over 65 may be 3-4g rather than 2-3g, due to age-related anabolic resistance (the mTOR pathway becomes less sensitive to leucine signalling). The calculator does not currently adjust thresholds by age.
-
No medical advice. Individuals with kidney disease, phenylketonuria (PKU), or other metabolic conditions should consult a healthcare provider before using high-protein supplements. The calculator does not screen for medical conditions.
-
Calorie estimates use Atwater factors. Protein: 4 kcal/g, carbohydrate: 4 kcal/g, fat: 9 kcal/g. These are standard approximations, not exact for every food.
Sources
Related calculators
Protein Intake
Calculate your daily protein target based on body weight, fitness goal, and age. Evidence-based ranges from NHS, ISSN, and sports science research.
Macros
Calculate your daily protein, carbs, and fat targets based on your calorie goal and body weight. 6 presets from NHS to athletic performance, with per-meal breakdown.
TDEE
Calculate your TDEE using Mifflin-St Jeor or Harris-Benedict formulas. See calorie needs by activity level.
Meal Builder
Build meals from real foods and see live macro and micronutrient totals. Adjust portions with sliders, track calories, protein, vitamins, and minerals against daily targets.